|
I didn't have a pickle fork, but I was able to get my axles out. I'm saying that you can get the hub to come off of the axle without taking it loose from that knuckle that you have your pickle fork on.
If you just want to get your axles out, you don't need to pry anymore with the pickle fork.
Go ahead and take your brake rotor off. Then you can see better. I think you've missed a bolt that you need to remove. Once you've got the right bolts off, your front hub will be able to flop around in a whole bunch of directions. It'll be very floppy. You should be able to flop it up and towards the front or back, and get the end of the axle to come out of the hub.
Good luck. I know these instructions suck.
Flunky
|