[tobyhd1]

:thumbup: :thumbup: :thumbup: For you v-twin motorcycle types.The Forced air Induction Collector exhaust system really works.I bought one of these systems (2 into 1) and the technology behind them is spot-on.The ceramic coating,in and out,gets the spent gases moving out the end of the pipe where it should go and not through the walls of the pipe like most of the pipes out there.Has the same principal as the old asbestos type wrap seen on most high performance engines of all kinds.The coatings are now offered in three colors including "cermachrome" which is a shinney aluminum coating that gleems.You really have to see the system to appreciate it.I was running a bassani system before the FAIC system and you should see the dyno graph now.I personally gained 1hp and 4lbs.ft. of torque max.HERE ME OUT!! Most torque graphs suffer right after roll-on on a typical system because of cam timing,reversion,etc.NOT THIS SYSTEM!I had a 3-4 ft.lb. dip in curve 400 rpm. after roll-on and then the usual pull to the peak at4400 rpm.NOW it just pulls from the word go to peak at 3800 rpm.(600) rpms less and holds it much longer.Where the dip was before is now a 12 ft.lb. increase-tell me that isn`t something you can feel!!90 ft.lbs and 80 hp. 80 cu.in.Hp increases across the length of pull (6-8)!! I`m a torque guy and this pipe is wicked in all aspects.