|
you have to unscrew the plastic holding screws that hold the trunk liner in. after you get a few of these screws off, you will be able to see behind the taillight. Over some of the screws are little plastic things. Take a pair of needle nose pliers and pull these plastic things off. now take off the bolts... Here's the interesting part. Infiniti, in all its wisdom, decided to not only secure the taillights with screws, but they also decided to use a shiz load of Silicone. Now you have two options. 1) take a hair dryer, and heat the silicone up to the point where you can pull the taillights off. or 2) turn on your lights, and blinkers, and prop your brake pedal down. the heat from the lights will heat up the sillicone, and after about 5 minutes, the silicone should get all gooey, and you should be able to pull the taillight off. Good luck, and make sure you let the sillicone is loose enough so you don't break the lense
|