There are two screws one on each side of the center console toward the back. They can be easily seen from the back seats if you push the front seat forward. Once these two screws are removed, you can partially lift up the center console. I meant partially because there are two additional screws in the front not accessable until you remove the panel surrounding the shifter. By lifting the center console up, I have room to pull up the panel surrounding the shifter. From there, I can see all the mechanic inside. I will try to get a digital camera to post the pictures later. Right now, I'm not sure what to do next, replace the solenoid or try to figure if the circuitry from the brake is messed up. I don't even know where these circuitry is. Any suggestion?