Hi.. will be doing all the peugeot 206 WRC... but first i start off with the 2000 version.
The photo above is shown as a difference of before and after spraying.
This "Mr. Colour" No.167 Gray Sliver Mica was recommanded by an expert. This colour was used instead of Tamiya's recommandation of TS-17 Gloss Aluminium because the Gray Sliver Mica is more finer and is more suitable for 1/24 scale = Explained by the expert.
I'm not sure whelther this 2nd photo convince you or not :P
ok.. 3rd photo show a difference of before sanding and after sanding the front moulding line (Line is beside the frontlamp)
From this photo, you can see that actually i have done the necessary painting first then i mask it and lastly to spray the whole body. In This way, I won't "dirty" my car later on.
This will be the effect after taking the masking tape off...
i'm starting the chassis now... going on fine...