|
I found that you can run the wiring through the inner guard.
At the front of the drivers door you can run a wire(s) though between the 2 skins of the inner/outer panel which will bring the wire out at the front of the engine bay by the head lights,(there a big holes already there in the inner skin), then run the wire to where ever you want to go with it. It takes a bit of mucking around but it saves drilling a extra hole etc at the fire wall....and you dont see the wires !!!
At the door,remove the seal that holds all the wiring for you electric windows etc and put your new wire(s) in with the rest of the wiring loom already there on the front piller....poke it though and it comes out inside the car.
Primera Man
|