Maddog I assume you are talking about TSL radials, if so the 32" is 10.5" wide which is basically the same width as stock so with just the suspensison lift you probably will not rub.(Isn't this what Will is running?) I have the 767 with the 4.75" backspacing(15x8) and run 32x11.5 SSR's and have no rubbing on the torsion bar anchor like Vikram does with the stock wheels and the suspension lift/body lift...I also have a 3" body lift and do not have any rubbing in the rear...not sure if Vikram had the extra inch if he would rub in back or not. My plan was to buy 15x8's with 4.5" backspacing and run 33x12.5 SSR's but I could not get the wheels custom made before I left for Colorado, this combination I feel would not rub either but i am not sure...you would need a 3" body lift to do it though. You should not experience any rubbing running those wheels and the 3+2 lifts.