|
This is the hardest bit of the kit to do and it takes a bit of time.
Spray the whole piece in undercoat first.
Then your finish coat of white.
Using Tamiya masking tape you then have to paint the green. Mask a straight line where the green will go and carefully mask of the whole area that you dont want to paint. This is the worse bit as you have to try and mask around alot of the spoiler struts.
Paint it green.
The next bit is to do the black. Mask a straight line through the middle of the headlights and right around the sides that are to be painted black.
You have to mask this of very carefully again so you dont over spray on to the white and green.
When you have finished spraying, the red decal covers up the line between the white and black. Make sure you lightly sand the "ridge" of paint of as it will show though the decal.
Its hard to do...i had 3 goes at getting the green line just right.
Make sure you use Tamiya Tape...as its the best to ese.
|