Quote:
Originally posted by mr_tw
thank you I appricate it quite a bit but I was wondering if there was any bolt on preformance parts that I would be able to buy and I also have another question I noticed that there was a bunch of wires attached to the intake as it was running along the driverside of the car (as it runs toward the haedlight) and I was wondering if I needed any of that like is it my mass airflow sensor and O2 sesor or what are they, because I just figured if I could bypass then and just put a cone airfilter and a heat sheild on the end of the intake (where the airbox currently is) because that should provide quicker boost. also does any company sell a cam gear and if so does anyone know to what degree to turn it to achive max preformance with a stock cam? and again Thank you for your help, it is much appricated 
|
1st off your welcome.
2ndly these cars dont have a mass flow sensor. they have a map sensor.
you dont need any aftermarket parts for your car. its why you have a turbo to cover come all those bolt on's. You want more power? get a one piece intake. get an intercooler. get a blow off vlave. get a 5th injector. run 18psi. go to you local walmart. and proceed to by a new pair of pants
as for cam gear. again go to www.thedodgegarage.com Gary D runs
a company that sells aftermarket parts for your car.. he sells a niffty
cam gear.. and you could also get some underdrive pullies too.. he also
suggests running mobil 1 5w30 synthetic. good for 5hp all round. and the cam you have in your car now. is actually perfect for it.
3rdly. as to your wiring question. your going to have to show me a pic as to what you mean .
hope this helps
Bernard