The wheels will look better once they are painted to go with the scheme of the car. At least to me... As they are now, they look out of place.
I decided to lower the front by about 0.060 of an inch by removing the spring bosses in the lower control arms. Then I raised the rear by about the same amount by making new coil springs. Not a lot of difference, but enough to see and the rocker is no longer parallel to the ground.
The tailpipes interfered with the larger rear wheels so I cut them off and made them exit in front of the wheel wells. I also filled the mounting indentations in the frame for the tailpipe hangars. The exhaust system was intentionally distressed.
