Quote:
Originally Posted by 1995TS
Yes there is, the EST has to to bypassed.
It is a single tan wire, with a black stripe, attached to the engine wiring harness at the right shock tower. Unplug the connector , and set the timing to specs
Good Luck
|
Hey, thanks for the reply! I've looked for that tan/black wire for days and there is no single wires anywhere under the hood. There ia a tan/black wire that runs with a bunch of other wires, inside a jacket, from the distributor to the right wheel well. The wires run to a junction block that you can unplug using a 1/4" socket. The plug is about the size of a deck of cards. So am I supposed to unplug the whole junction block of wires?