|
Re: Broken heater hose connector repair
Commercially-available "special tools" are available for exactly this purpose.
Discontinued, but some still exist in the wild.
https://www.lislecorp.com/specialty-...ler-repair-kit
The removal bit from the tool set, above, is Lisle 62200--still produced.
https://www.amazon.com/Lisle-62200-H...7085809&sr=8-1
I replaced my rotted, leaking original GM connector with the Dorman replacement more than 20 years ago. After nearly 20 years, the engine was replaced. The Dorman coupler still looked "perfect" so I re-used it. I'm not promising that Dorman still makes that coupler to the same quality standards...but it's worth taking a risk on it.
I think it's this one. Please confirm.
https://www.amazon.com/Dorman-800-40...s%2C320&sr=8-7
__________________
.
.
For the good of the Free World, DEMAND COMPENSATION FROM CHINA for their release of the Virus Originating in the Wuhan Laboratory, released (intentionally or negligently) into the world in 2019 (VOWL-19). Ten trillion to start with, increasing as needed from there, PLUS compensation for the sickened, and "wrongful death" settlements for the families of those who didn't survive. END trade with Communist China.
|