[jwichman]

Finally got around to replacing the EVAP charcoal canister, removed both ends and blew out all of the hoses, including the vent valve hose, the purge valve hose, the fuel fill neck hose and the hose between the charcoal canister and fuel tank. Put it all back together and I’m still unable to pump gas into the tank at much more than a trickle (22mins to pump 10gals of gas). The vent valve is also relatively new and verified to be open. The EVAP system appears to be operating correctly as I’m able to monitor EVAP demand and fuel tank pressure via DIY grade scan tool.
What am I missing. It seems like there has to be a restriction in the fuel fill hose that allowed compressed air to pass but is not allowing fuel to pass. Anyone have any ideas??
Thanks in advance for anything offered.