|
Re: Ignition lock cylinder
Orchid, while the mx6 might be interchangeable; i can find out tomorrow at work..
sorry for bozo jacking (or attempting to) your ride.. what there wasn't any accords or f-150s in the area.. seriously though,
i think the 2 different ford part numbers are:
F32Z11582B and F62Z6122050AB; and i think since the vehicle is no longer supported by FoMoCo, it will be more difficult, and more expensive to track one down..
plus, you are in canada, so anything coming from the us will probably be almost twice the amount in taxes/tariffs/mark-ups/shipping/etc..
i will confirm tomorrow if mazda swaps in, and if yours is available from any ford canada outlets; but their is another option...
--when my 93 subaru legacy ingition went out, no aftermarket, and subaru wanted over 275 usd!! that's almost how much i spent for the whole project car.. so, i removed the cylinder, gutted it, and re-installed it empty (w/o lock or anti-theft) and the key was just to basically for turning lights and radio on; and i installed a fourteen dollar heavy duty 14 volt push button starter on the dash and wired batt. to starter and no ignition switch needed..
you might see if amazon.ca has it available.. even if not a member, if it is 35-55 dollars it is still free ship, but i would not pay above $85 for what should be a 15-20 dollar part.
will post again in 10-12 hours..
|