|
Re: 2001 s10 died while driving
Quote:
Originally Posted by brcidd
I've seen the ignition switch go bad on those--check to see if you have battery voltage at the coil when ignition switch is in "run" and/or "start" . Use a DVM or a test light to be sure.
I had one (4.3 Blazer) that tried to start only after you let off the "start" position- it would give about 2 shots and not run in run. Come to find out the voltage to coil dropped out when in start position--right when you need it most-and came back on in "run" position..Put 12v directly to coil with jumper and she started right up (by-passing ignition switch). new ignition switch fixed it.
|
Yes, forgot that.
What year is your Blazer? Got one 93 plow truck.
__________________
"When I was a kid my parents moved a lot, but I always found them."
Rodney Dangerfield
|