Thread: Socket Funnel
View Single Post
  #2  
Old 05-05-2019, 05:22 PM
Schurkey Schurkey is offline
AF Enthusiast
 
Join Date: Jul 2005
Posts: 892
Thanks: 13
Thanked 58 Times in 58 Posts
Re: Socket Funnel

Lame. Extremely over-priced. The Communists will knock this off for $5 and sell 'em at Hazzard Fraught.

If this were made in USA or Canada for ten dollars instead of thirty, it might be worthwhile for some folks. (Not me.) I don't see this as useful AT ALL for changing oil--the funnel would need to be transparent so you could see to put the socket on the drain plug. And when the drain plug is at an angle, I think it's very likely that you'd make more mess with this funnel than by using a commonly-available drain pan of adequate diameter.

I've also got doubts about the strength of the square drive in terms of removing stiff plugs.
__________________
.
.
For the good of the Free World, DEMAND COMPENSATION FROM CHINA for their release of the Virus Originating in the Wuhan Laboratory, released (intentionally or negligently) into the world in 2019 (VOWL-19). Ten trillion to start with, increasing as needed from there, PLUS compensation for the sickened, and "wrongful death" settlements for the families of those who didn't survive. END trade with Communist China.
Reply With Quote