[Serioga]

So, the bottom of back wall of the cab has filled up:

Almost finised on the left side, not on the right. Here is the original:


Door pockets and elbow-rest are up graded too:



So, the steering wheel has been remade. I used the rim from Ford LNT kit. The rest of steering wheel are styrene, epoxy patty, wire, piece of sprue. Though Ford's rim is 1mm bigger, TopKick's will have an ideal cirkle.


I also made the gear shift lever.

Here is how it should be:

I also filed down the bottom and back side of the dash. Now it sitssits a litle lower.


Almost like at home. Erly Tahoe and Silverado have the same cab and dash.