I have a 5th gen 2001 Nissan Maxima. I just replaced the alternator with one from AM auto parts I'll link it
HERE. I followed this deceptively easy looking
youtube video to remove it. The only thing I did different was I had to remove the belt tensioner to get to one of the bolts. After that I installed it by doing the reverse. But After it was back in it started rattling a little. Its loud enough to be heard from inside the cabin and it gets less noticeable at higher RPM's and when looking at it you can actually see it moving. So I got back in and discovered that the long bolt that goes through the back was in the wrong place when I was tightening it and the piece of metal that stops it from freely rotating got bent so I bent it back and put it all back together being careful to do it right but it didn't help at all. If anything its worse now. I tried adjusting the belt tension several times but it didn't help, it did get worse when it is tighter.
It works fine but is very annoying and I'm worried it might cause other problems latter. Does anyone have an idea as to what could be causing this? I'm stumped.