[BGALLO]

2002 Montana with driver/passenger front and side airbags in the seats. Started getting a BO101 code for a while. Before I got the driver side front impact sensor changed the driver side seat airbag went off one day while the van was idling in the driveway. Replaced the airbag and discovered a wire had a cut in it up in the seat and must have grounded against the frame. Replaced the driver front impact sensor at that time as well. As soon as both were replaced then I get a BO104 (discard passenger front impact sensor) code. Checked all wiring and connections and tried to do an ohm reading on the sensors but get no reading, even on the new one. Replaced the passenger side sensor and you guessed it......still getting the BO104 code. Getting very frustrated with this now. No other codes on the scanner and if I clear the 104 it instantly comes back. Used brand new GM sensors. Any ideas?????