Quote:
Originally Posted by Tech II
I agree.....I have tried to find it to no avail.......I know some relays are integral to the ABS module, and if the relay is bad, the whole module has to be replaced....
The only wiring diagram I could find shows it separate from the module, unless the diagram is wrong....it also shows a soldered wire coming off the line going to terminal C, which makes it look like it is external to the module....;
|
It's OK, I know that there was a difference in production from '97 thru '99 and after that the standard shop and wiring diagrams were correct right up through '05. For some unknown reason the '99 is a 'one off' with some non-standard design characteristics.
Point to be taken here is that the van doesn't owe us anything and has more than paid it's way. Just don't like having something to fix that can't be.
I may pull the panels down under the dash (driver's side) and see if I can find a relay that clicks when the fuse is pulled / replaced. The trick would be to find one to replace it with. If I can't fix it, I may pull the instrument cluster and remove the bulbs - LOL