|
Re: ABS / TCS on again after dry spell
Looking at the wiring diagram, it does not give the location of the relay...it shows it being external to the EBCM/EBTCM......chances are it's hanging somewhere in the engine compartment by itself or with other relays...
I see 3 connectors going to the EBCM/EBTCM module......C2, has terminal C(red) that is the power from the relay, so you can back probe that connector to see if you are getting power from the relay(key on).....C2 terminal D(blk) is your ground circuit......so if you back probe terminals C and D of C2, and turn the key on, the test light should light verifying power from relay, and a good ground....remember, all 3 connectors have to be attached to the module for this test....
|