The van will not start period, the starter motor won't turn over ether. Everything else works fine. Now I have found that if I ground the light green wire that comes from the low side of the starter relay to some anti start thing in the cluster. If I ground that wire. The starter motor will turn over. But I think there is no power getting to the ignition coil .The wiring diagram book that I have reports that the ignition coil is supposed to be on the right side of the engine, between the engine and the battery. I pulled the ignition switch and tested with a VOM And I found 12vdc on the primary (hot line from the battery). I also found power on the output wires from the switch's also. I need some help on this please.
Steve