Now I can continue on the center console, and put on the final pieces and shaped the form. Gaps are filled with putty and sanded smooth.
The cockpit is painted semigloss black. The rear got some microballs + flat black to continue the Alcantara surfaces.
In the middle there will be one of these handles with 3 buttons, the same as in the LaFerrari. As I don't have any casting equipment, and I don't want to buy an extra kit for 50 €, I will try to make it myself, from sheet and a round rod.
The sheet is cut into the right shape, and bent in one place. Then I made some cuts, and glued in pieces of the rod. The rods were cut of vertically, the gaps filled, and the whole thing glued to a base piece. Everything is covered by C/F, and some red/white + black/white decals and red/black paint added.
For the floor I used some P/E checker plate. I also added P/E rubber floor matt, foot rest and pedals. In the rear I added a big piece of coarse P/E mesh.
Finally I added a blue P/E horse emblem to the seats, and some seatbelts using several different things from the scrap box, and glued the seats into the cockpit.
