Quote:
Originally Posted by papaya
hi thx, for now i'm using Future Floor Care as gloss coat for small parts.
can you explain the experience required for polyurethane coats?
|
So basically it need to be mixed with the ratio shown on the package or guidence. For different brands, the ratio may varies. Lots of guys in Europe use zero paints 2K clear, the ratio is 100 Parts Clear, 50 Parts Hardener + 10-30% Thinners . when applying it, first to apply a mist coat, let it set for 5mins, and then apply a wet coat, when doing this, the air pressure needs to be high, like 50 Psi. and pull the airbrush trigger to the full and Move slowly to give a saturate finish. I think two layers is maximum, more layers will make the result too thick and make the car like a "candy". Still need to mention that all these procedures are better to be done in let's say 1 hour. after that the paint may become too viscous.