Quote:
Originally Posted by HeWhoKillz
And it is used for pushing the outer shaft out of the spindle? I have watched alot of videos of jaw pullers and see nothing but pulling the shaft out of the transmission, which isn't what I need. I have it out of th transmission I just can't get it out of the spindle. Other videos show pulling things like harmonic balancers off but not pushing the axle out of the spindle.
|
The way the puller works the threaded rod would push on the axle. Most CV axles I have ever dealt with have a centering hole. You hook the jaws on the spindle, spin the threaded rod up to the axle, then using an impact tighten the rod.
It will put a strong steady force on the axle to push it out.