|
Re: 2006 Chevrolet Impala issue
First thing is to verify engine is not seized or damaged in any way..loosen serp belt and try to turn engine. The tensioner pulley has a spot on it for a 3/8" ratchet but will need a long handled ratchet or power bar for the required leverage.
Take the right tire off and use a 18mm socket and power bar to turn the crank shaft.
Look at the diagram I attached to the previous post..you will see the relay on there..you can use YouTube to watch a few good videos on how relays work..this will help a lot.
__________________
2002 Dodge Dakota 4x4 3.9L
|