Quote:
Originally Posted by j cAT
what can happen is the wiring and the fuse box area can get damaged. wiring running down from the fuse box requires a loom plastic to protect from chaffing esp at the casting metal.
if the truck has had motor//tranny work this is quite common.. sloppy repair work on the wiring placing.
good luck
|
Also, sloppy assembly at the factory can accomplish the same thing. This one was chafing against itself inside the convoluted tubing and inside the plastic tape wrap as assembled from the factory, 10" from the PCM:
Fortunately the two failed circuits in this case only involved the ABS and cooling fan operation, so it was really nothing important. As long as the GPS and radio work, the vehicle is just fine, right?