|
Re: Broken studs
My idea behind it. If I could figure out how to post a pic I would. The way I explained it above. U can go right thru and around the hub bearing and everyone wants to replace. I do know this. Because I have over 15k on them and no issues taking them out. Now u have little choice to remove the old stud if it's long. U are forced to pop it loose and cut the back of the stud out. How I did them is used a straight angle grinder in used a small angle taking about 3 / 4 of the stud cut spin it around and it will pop out with little trouble. Collapses on itself in and out. Hope this helps someone.
|