Quote:
Originally Posted by Tim W
Hello,
No messages. 4 low works well. 2 high works well. Will not go into 4H and 4A.
When in 4 low and switch to 4H it will go into 4A and work. I have replaced dash switch and actuator. Did not help.Any help would be great.
Thank You
Tim
|
surprised no 4wd error message.
improper switching is the encoder not the actuator ...
the reason these do cause problems is , the fluid need be changed every 40K miles. the trac II transfer case fluid must be a nice clean blue color .
never use 4wd in any position on dry solid pavement. avoid using locked 4wd. use auto 4wd as it puts less stress on the drive train.