We just replaced the suspension on my dad's 1995 Lincoln Town Car, and the instructions for disabling the Air Suspension Warning Light were not very clear. When I looked on this forum, I didn't find anything conclusive.
As a matter of fact, on his car, the connector had two white plugs on them - not a black and a grey. We first tried disconnecting the grey connector just to see if the light still came on, and it did. Plus, the black connector did not have the green wire with a light green stripe, but the white connector did.
So, we tried the white connector and that was correct. So I plugged it back in, and clipped the green / lt green wire and taped the ends. All is working. I'm going to (try to) post a photo or two as well.
Here's a photo showing the location of the module.
Here's a photo showing the green / lt green wire cut.
