View Single Post
Old 01-12-2014, 10:11 PM   #9
lovenmyfive
AF Newbie
Thread starter
 
Join Date: Jan 2014
Location: front royal, Virginia
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 05 Chevy suburban clunking noise

Quote:
Originally Posted by j cAT View Post
on the operation of the 4WD you can put this in 4wd hi and auto 4WD at any speed.

just let up off the gas pedal to reduce any stress. never use 4WD LOW as this is when you are plowing or pulling a tree out of the ground. you must be stopped or going 1 MPH....

DO NOT USE ANY 4WD SELECTIONS ON DRY SOLID PAVEMENT.

using this 4wd on solid dry pavement will rapidly wear out the drive train...

I only use 4wd when it is snowing out and snow on the road surface.

sometimes pulling a boat up a steep ramp that has sea grass on it etc...
Thank you I've only had to use 4wd a few times and that was in the snow. Ive been testing it in my driveway which is gravel to see if it works right since the other case was put it, in whichbit does not. When I go into auto it says to service 4wd and I have to completely cut it off to go back into 2wd same thing in 4wd hi, don't even hear the case move? Looks like ill be seeing a mechanic soon.
lovenmyfive is offline   Reply With Quote