|
Re: ABS Wheel Sensor Replacement 1996 Chevy 3/4 Ton 4X4
I would guess that the rear sensor is working . the front sensors I would use a volt meter ac volts crank hub by hand at a good rate and you need more than .25 VOLTS AC . a good new sensor will put out .5 volts ac or more.
place a deep socket on the lug stud and use that to crank the hub around .
sounds like they used a different hub assy . look up the correct hub assy part and see whats different. which one is wrong . the front sensor outputs should be close or you will get these issues.
until you fix this remove the big ABS fuse. this will prevent any ABS activation to avoid brake failure.
|