Good evening,
I recently wired in a new CD player in my car. Prior to hard wiring the aftermarket speaker wires, I was misled to believe that a connector tucked to the left of my glovebox / behind the console was what I needed to cut and wire into. After no sound came from those wires, it was obvious one or both of us was a complete idiot, and I wired up the correct speaker wires. Now, the problems:
1. My air will not run, lights and controls are not working. The display for temp control and outside temp is blank.
2. When I disconnect all but a black connector on the far left of the back of the control, the blower runs freely at full blast.
3. I have since lost the connector I removed. Attached is a photo of the exposed wires. O e purple wire is hot, and when connected to one of the other purple, the temp control display lights up "-188e OUTSIDE TEMP".
I am hoping someone might be able to tell me the correct combinations of wires to make this thing work again, or that there is a connector i can buy to rewire it together.
Thanks in advance!
Here is a link to the image: https://db.tt/KkcLvKJV