View Single Post
  #4  
Old 10-17-2013, 11:30 AM
Chris2007 Chris2007 is offline
AF Newbie
Thread starter
 
Join Date: Jan 2007
Posts: 58
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 1992 3.1 died, starts with starting fluid sprayed in intake, sort of

Quote:
Originally Posted by Tech II View Post
You can have a geyser and not have enough fuel pressure.....need to get a fuel gauge on that schraeder valve....

Need to check for spark on all 6 cylinders....check the vac line to the fuel pressure regulator for gas.....

Have you been losing coolant?
Not loosing coolant (except from places where I should be .

If you weren't getting proper fuel pressure, wouldn't the plugs be dry? I could rev the engine with the gas peddle (while ether was being sprayed in the intake).

I ordered wires and had the plugs for 2 years (!!!). I just need to throw them in, hopefully today. I'll give that a shot.

This car has how many computers? The main or only one is behind the coolant runoff, or a couple feet behind that inside the passenger compartment? Is there another controller somewhere? I have a hankering to give all that a gander. Maybe bad capacitors .
Reply With Quote