Quote:
Originally Posted by goiserclause
Call some shops to see if they will scan it for free. Autozone and other parts stores will, not sure if you have one nearby. Try gently wiggling the wiring harnesses and wiring to see if that sets off the CEL.
|
autozone will read them for free.. but not my older car. they dont have the end. to adapt. from '98 and down. i think he told me. so say,,me.. ,
and they got rid of the old 1 when they went newer.. so say,,me,,..
well,,what started it all was when i got the shop to put me a module,and crank sensor .. and burnt starter and starter wires [harness]
by using a jump starter.
he's the 1 thats going to charge me the $75 to hook it up [codes]
every wheres else its $85-$100 to read the codes
im using a all metal code key that i got from autozone,to run a internal diagnostic where it flashes the "check engine light" then call autozone with the code and let them to look it up.
i did move the throttle positioner wires and the fresh air ,unclipped, cleaned, reinstalled