Next one...
More cables add.
You can see some parts i add to connect the cables.
Here some very smal golden rings from MIG.
Even for the camera it was maybe difficult the parts are so small.
Here you see where the rings are placed.
At the end i used dark earth wash from MIG. to make them used.
All the engines are finished.
Gearbox and exhausts added..
Chassis frame i paintes semi closs black.
Started with the fiberglas paintjob in the cockpit and the body parts. As you can see ebgine is alreade fixed.
Between i always check if the parts match.
Looks good.
Also the body parts with the basic light brown flesh color from valejo.
After i lighted up with a lither brown also from valejo and then used the Rust washing from MIG.
This is the thing is used.
After the washing was dry, i light it up again with a very light yellow brown and at the end with pergament withe, only very light dry brush.
Amazing effect, what is possible just with colors.
Another small parts session.
Fuel and oil tanks installed.
Pedals.
For the brake discs i used photo each parts not the brake discs from the kit.
A little chaos on the working place.
Painted some other small parts.
Painted frame parts inside the body parts and add some other parts.
Small parts add decals.
Installed some parts in the cockpit, the seat is just a check for match.
With body.
Starting with detailling the hole thing.
Making lines for the brakes.
The messing tubes are from Lion Roar.
Another camera problem because its so small.
This is the result.
Continue soon.....