Quote:
Originally Posted by back2life
hi guys need some help..i have an 01 deville (base) with the air level shocks in the back. i took out originals and replaced with Gabriel Hijackers. my old airline would have worked but the ends were seized/ rusted into old shock so i had to cut them. my question is can i use an aftermarket air shock line to replace them from the pump? also dont even know where pump is located but havent looked yet either lol. or can i use the cut line with 2 new o-rings even if the line doesnt have that flared end nomore?
|
I have spliced pleanty of air lines using 1/8" compression fittings from NAPA, just use a small pin to help open up the hole in the plastic line after you cut it. Use a razor blade or sharp knife and a sawing motion to avoid really crushing the line when you cut it. The pump is under the right rear of the car, above the muffler.