View Single Post
  #1  
Old 06-09-2013, 10:04 AM
badtransam86 badtransam86 is offline
AF Newbie
 
Join Date: Aug 2011
Posts: 36
Thanks: 0
Thanked 0 Times in 0 Posts
2000 dodge durango starting problems

after checking the timing everything seemed ok i put the motor back together and tried to start it the first try it just hit like it was going to start and then i cranked it again and it just cranked and cranked i held the gas pedal down to the floor a couple of cranks it starts but u got to keep the pedal smashed down to run it i cut it off to see if i can start it back up without the gas pedal down to the floor and it wouldnt start its getting plenty of fuel i didnt put the air box back on and i got little vacumm lines off of it plus the pvc hoses are off too before i put this thing on together would this seem like a vacumm problem or timing still be off in the motor i dont know exactly what happened to this motor i purchased the vehicle with the motor apart there is no check engine light coming on while its running
Reply With Quote