Hi there, well, here I'm with new stories about the "mommy-van" alias my windstar
Well, in my ealier post, i told you about the failures and all the stuff with the transmission (i doesn´t rebuilt it in the correct way), well, after the second rebuild of the tranny (by myself) the tranny worked perfectly, perfect shifting, no delays, no heating, it was like a dream becoming true.
But, nothing its perfect, and then

when i was trying to park the van inside the garage, something exploded and about a quart of oil were disposed into the ground. By the position of the oil leak, I supose it was the low/interm. servo, because also 2 of the 3 bolts were on the ground.
Now i think my van its crazy

or she hates me hahaha. This time the rebuild were under specifications, all bolts were properly torqued, all pistons were properly inserted, well, this time it was well done the rebuild job, but i think that the servo cover was damaged, cracked or something or the bolts threads were damaged, really i dont have checked it because its raining outside, so i only pushed the van to park it in the correct way, and i collected the bolts.
Tomorrow i will update with more information, because i actually haven't see any failure like this, the servo cover explodes, that is a very rare failure LOL (i have to take the failure with humor otherwise i would be kicking the van

)
Also i will upload photos, and well, use the DIY post for replacing the servo and the cover without droping all the transmision again
Greetings