Thanks, Tom!
It's been a while since the last update -- travelling away from the bench...
Anyway... I finished s few details, and have got to the stage when I can try a first coat of primer to see how it looks (and what needs fixing...)
There's obviously some filling, sanding and repriming to do here and there, but overall, I'm pretty happy. As you can see, I've fitted the rear valance. I figured out that you can get the interior in and then fit the chassis in at the front and finally join the two, which means that you don't need to put the whole thing in as a unit and fit the valance last. I think I can get a much better finish on the back end by doing it this way, with the valance seamlessly blended before painting. Not quite seamless yet, obviously, but getting there.
The other main details are proper "scoops" over the engine bay vents, the windscreen trim, and fixing some odd damage at the rear lights.
Not the best picture, but you get the idea. I added a thin strip of plastic card to the moulded ridge, and then built up and blended it using superglue + micro balloons, because I thought it would be structurally tougher than plastic putty, but still easy to sand and shape. It'll need a smear of regular putty to deal with a few imperfections, but you can see that there's now a decent, and thin, lip for the grille to hide behind.
Skip Jordan pointed out to me that there's actually a gap between the windscreen and door chrome trim on the A-pillar, so I scribed and sanded one to give me something to work on with the BMF. I think that minimising the "weight" of the chrome on the kit will be key to achieving the elegant look of the real thing, especially on the door windows.
And finally, an odd one. On my kit, the outside lower edge of the rear light "oval" was misshaped on both sides -- almost as though it was "torn" outward. It's near the worst mould seam on the kit, between the light clusters and the boot opening, so I suspect it's something to do with the way the mould opens to eject the body... Anyway, once again out with the microballoons and superglue. Still not perfect, but much improved.
Next task is to hit those areas that these photos have highlighted as needing some more attention with the plastic putty, as well as a few more I haven't shown you (mostly front end seams...).
I'm hopeful that she'll be shiny and red by the end of the weekend...
bestest,
M.