[ptjeepmech]

Well if anyone was wondering, iI figured it out. When I installed the bridged combination flasher, it fried the trace line to the right signal switch sence in the left multi functional switch (turn signal/headlight switch). I found this out by acquiring the wiring diagram, pulling out the multi function switch and testing the conductivity of the left vs. the right once activated. Right was dead, ordered and installed new switch from ebay $56.25 and wala! LESSON: If soldering the combination flasher, try re-flowing first and not adding addtional solder. Also, use the right size solder tip for the area you are working in. Plus side, pretty sure I have another good combination flasher hitting ebay soon!