Bit more work on the interior. The cast in lines have been removed and replaced with a combination of looming cord (the thicker black bits) and also fibre optic cable (the thinner black bits). The blue gear change rodding is copper cable sheathing.
In this view you can see the fire extinguisher which has had silver strapping applied and also a decal created from a real image. Also visible is the gearstick which replaces the needlework pin (!) supplied by Provence Moulage, which is a shaped piece of plastic rod.
The cage has started to go in as well, which has needed quite a bit of adjustment. I'll not put the final piece in until the seat has been done, including the belts, as it would be extremely tricky otherwise. The cage also locates the dash unit.
The seat has had a carbon decal applied to the back and sides and the 'Recaro' decals. I have also added belts (not included in the kit) from painted tape. The centre buckle is an adapted Ferrari 250 GTO wheel hub spinner! The shoulder belts go back to an addition to the rear section of the cage.
The new steering wheel is also complete, just awaiting a couple of decals. Here it is on installed on the completed dash;
