Last night i pulled the fuel rail to make sure i was getting injector pulse. All four were spraying gas as the engine was cranked over. So at this point, I have spark and I have fuel, but it will not start. After some reading last night I read something about if you have both spark and fuel it is probably timing. SO, I went out last night and tore apart the engine to check the timing belt that I had replaced about 6-8 months prior, but everything was fine and it is still in time. At this point I am starting to get PI$$ED!! I am buyin a used computer to try because I dont know where else to go from here. Oh, also i check the computer ground and all the others I could find under the hood, but of course nothing changed. HELP!!!!!!!!