Quote:
Originally Posted by Major Funbags
It is in fact. A cracked head. I guess when I had them milled. I should've asked them to check for cracks. Live and learn. Reman heads on the way.
|
the company that worked your heads is a crook. they knew that head was cracked. they then would not get the job if they informed you of the crack .
now you need 2 good heads.
I do not recommended head cutting. this causes the combustion chamber to be reduced. also when the heat has distorted the head ,this is a stress on the metal.
good to report back . this will help those with this type problem.