Quote:
Originally Posted by mno221
Ok guys i have a CAN OBDII scanner, these are the reading when i hook the scanner up:
MIL Stratus - OK
Misfire monitor- OK
Fuel system mon- OK
Catalyst mon- OK
Evap system monitor - INC
Oxygen sens Monitor - OK
Oxygen sens HTR - OK
EGR system - OK
With that being said what can be causing code P1130, I've replace the oxygen sensor on the driver side before the cat still nothing. Help
|
swap O2 sensors see if the code changes. Is this the only code ?
check the fuel regulator for leakage into the vacuum line.
this sensor gets wiring damage because the wire to it was not proper secured.