[GTP Dad]

This is a common issue on these cars. The job isn't bad to do as Tech II indicated. I purchased urethane bushings from Jegs for my 97 Grand Prix rather than go with the stock rubber mounts. You can get a new one from GM Performance Parts that is stronger and gives better handling. I don't remember where the one came from when I had to replace it. It was a solid bar from either Andy's Autosport or ZZ Performance. We replaced it by removing both front tires and placing the car on jack stands so that the suspension would droop. Then we turned it upside down and ran it between the rails on the cradle. With a little manipulation we were able to get it in without loosening the engine cradle at all. Good Luck