|
Re: 96 Cherokee have run out of ideas to get ur started
Well, I would visually inspect all of the wiring harnesses. It's very easy to pinch one while changing out mounts.
Don't rule out the ign switch.
How did you check for fuel pressure? If you pressed the valve and fuel squirted out, that is *NOT* an adequate way to check. You need a fuel pressure gauge.
I'm unlcear on what you mean by "wanting to start but no engagement". Is the engine cranking over? Are you getting just one loud click? Does nothing happen?
__________________
Dad's taxi:
'88 XJ - 190K and going strong.
K&N, Ford Injectors, No other mods
|