|
Distance between sides of engine cradle?
I put my Cavalier in the ditch and bent some stuff up pretty bad. One of the control arms is destroyed (wheel 3" further forward than it should be), and it looks like the engine cradle might be a bit bent. It might just be in my head because the control arm is so bad. Can anyone with a known straight cradle measure the distance between the two sides for me? Preferably at the angled spots on the very front. It's a 2004, and I believe 96 and up are the same.
Thanks,
Jason
__________________
'04 Cavalier coupe M/T 2.2 Ecotec
Supercharged 14 PSI boost, charge air cooler, 42# injectors
Tuned with HP Tuners
Poly engine/trans/control arm bushings
Self built and self programmed progressive methanol injection system
|