For the MY98, i planned to build this without the rear lamp cover, and the rear grille will flush with the rear engine cover. The rear grille were cut following the rear engine cover.
a small piece of plaplate were use to stick on the edges to get a straight line. all gaps were filled with super glue + talcum powder
The rest of the body were primed to perfection, no more flaws this time.
"Super Veloce" decals applied, this make lots of difference to the overall outlook.
Decals after dried. Notice the whitish areas, these are places that still have air trapped inside, if proceed to spray clear coat there's a very high chances that "silvering will appear"
transparent film at empty areas were cut, add bit of Mark setter and Mark softer to makes the decals set firm to the body
Fujimi decals are bit soft and some areas were damage during the process. need to paint it back later.