|
Re: Car loses power when accelerating hard after using Seafoam
Ok, so the codes I am reading are:
P2104 (pending) - Throttle Actuator Ctrl System - Forced Idle
P2112 (pending) - Throttle Actuator Ctrl System - Stuck Closed
I'm not really sure what "Pending" refers to. I haven't yet erased the codes or taken the car back out. I did have a look around and noticed something interesting. The plugs seemed ok, a little tarnished on the side electrode. The intake however had a light brown liquid residue all over the place. There was a little bit along the intake tube and quite a bit under the filter as shown in the picture (the filter is brand new put in at the same time). I even found some around the pins of the connector on the throttle body. I've cleaned up what I could. Funny part is, looking past the throttle plate, everything still looks dirty. I'm not sure much of that Seafoam made it into the intake.
|